Bigbruin
tries to put Ryanpower2 out of breath with some serious overloading but
ended up being toally impressed...
"The first thing I wanted to
try was running everything as hard as possible. I started out by transferring
6 gigabytes of files across the network to the 4 RAIDed drives, copying
a DVD to the Raptor hard drive, and simultaneously running 3Dmark 2001
to load the processor and graphics card down. The whole time this was
going on, all controllers had all the lights and fans running full blast.
To add to all this, I plugged my Corsair Voyager flash drive and a USB
2.0 portable laptop drive into the front USB ports and had a file transfer
going between the two of them. I was expecting things to get a little
unstable at the best and to crash miserably at the worst. Needless to
say, everything was running quite slow, but as the High/Low event monitor
in Mother Board Monitor shows below, the +3.3V and the +5V rails did not
dip or rise a bit! As a side note, for the life of me I cannot get Mother
Board Monitor to report either of the 12V rails. I monitored the +12V
rail with the min/max functions on a Fluke multimeter and found no significant
fluctuations there either."
CableFREE™ Server Cable Set EPS12V
50cm Black
ACR-CB0533F
- CableFREE 24pin/F EPS12V to 24pin/F EPS12V,
50cm Black
- CableFREE 4pin/F P412V to 8pin/F EPS12V, 50cm Black
For use with Ryanpower2 CableFREE power supplies
to 24pin EPS12V motherboards.
Each Ryanpower2 CableFREE is built with 24pin
EPS12V and 4pin P412V CableFREE connectors built-in. Standard 20pin
and 4pin cables are included in every power supply.
If you are getting a EPS12V motherboard, this
is the cable set to get.
Enjoy the freedom of CableFREE - just get this
cable set and simply plug and play!!! You're all set with the EPS12V
standard.
FREE from changing standards!!
* note : some EPS12V motherboards require a
8pin power for the CPU, while some do not. The 8pin cable has been
included in this cable set so you will not be left hanging dry when
you do need it.
-----
AC Ryan changes the way power supply is designed with the new and revolutionary
CableFREE™ and Conductx™. From now on, all AC Ryan power supplies
will incorporate the CableFREE™ and Conductx™ starting from the
new series RyanPower2™.
CableFREE™... CableFREE™ takes
those unsightly and messy cables out of the power supply - yes, no more cables.
In looking at power supply design, AC Ryan has concluded that cables has often
been a significant weakpoint in a power supply - too short cables, too long
cables, messy cables, bad cables (no EMI shielding), changing specifications
that obsoletes a power supply (20 pin, 24pin, SATA etc), not enough connectors
etc. And with psu-modding, cabling presents an even bigger problem - non color
matched, different cabling and sleeving styles etc. By taking out the cables,
the CableFREE™ design removes all these problems from the power supply.
Conductx™ ... Now comes Conductx™
- intelligent, superior, styling, function, performance - you said it all. Think
of power extension cables (multiple molex extension, multiple fan extension,
24pin extensions etc), all FlexSleeve™ sleeved and Connectx™ color
matched connectors. Think of extreme performance cables with extra EMI-shielding.
Think of intelligently designed cables for special configurations. Conductx™
can be used with your standard power supplies, or for your modded power supplies,
and perfect companion. Conductx™ Lite (without LED lighting) are included
as standard (for those who think all those lights are a bit too much) while
a whole range of Conductx™ UVlighted cables are available for simple plug-n-play
modoptions! Customize it your way.
With a CableFREE™ power supply, you are now free
to use power cables that suit your needs (be it functional, performance or styling
needs). All AC Ryan's new power supplies are equipped with CableFREE™
design and comes with a standard set of superior high quality Conductx™
so you immediately enjoy the superiority that CableFREE™ brings to you.
----- - the true modding spirit -
The CableFREE™ concept has been inspired by Performance-PCs.com - a leading
modshop who pioneered the sleeving craze. Since the first draft in Dec 2003,
several public communities have also contributed with feedback as well as valuable
ideas. The launch of the Ryanpower2 CableFREE™ celebrates the power of
the modding community - the heart & soul of users, sellers, designers modding
as one. The result is that RyanPower2 CableFREE™ is NOT just another modded
psu. It is an open platform for maximum customisation & mod.